Are you looking for the best jib crane manufacturers in China? If so, you’re in the right place. In this article, we’ll compare the top homemade jib crane factories in China, highlighting their history, specialties, and what sets them apart in the industry. Let’s dive in and find the perfect fit for your needs.

Home made jib crane with photos

Product Details: The homemade jib crane was built using scrap materials and a main post given by a friend. The beam is 150mm x 75mm (6″x3″) and 2.3 meters (7.5ft) long, made up of two pieces welded together. The vertical leg is 1 meter (3.2ft) long. The bearings retainers are from the rear diff of a Nissan 720 4×4 pickup, with a standard 30mm inner bearing in the top retainer and the original taper bearing from the axle. A 40mm (1 3/4″) square trailer axle was machined to suit the bearings and welded to the back of the crane. The crane also

features a beam trolley made to suit an electric winch, and a cable festoon system for the electric wires.

Pros:
– Low cost: The entire project cost only $25 AUD for stickers and festoon wheels.
– Customizable: The crane was tailored to fit specific needs, including the use of…
– Sturdy construction: The use of bearings from a 4×4 pickup and a machined traile…
– Adjustable: Temporary angle brackets allowed for final adjustments to the post b…

Cons:
– Limited usage: The crane has not been used much due to ongoing house renovations…
– Complex assembly: The project required significant research and DIY expertise, i…
– Potential for errors: Initial installation required adjustments, such as lifting…

I want to build a jib crane

Product Details: A jib crane is a type of crane that consists of a horizontal beam (the jib or boom) that is attached to a vertical mast or pillar. It is often used in workshops, garages, and farms for lifting and moving heavy objects. Key components include the mast, jib, hinges, and sometimes a winch or trolley system. Materials commonly used are steel pipes, square tubing, and heavy-duty bolts. The crane can be mounted on an existing structure or a freestanding post with a substantial foundation[2][3][5].

Pros:
– Increases productivity by simplifying the process of lifting and moving heavy ob…
– Can be built using readily available materials and basic metalworking tools
– Customizable to fit specific needs, such as different load capacities and reach…
– Economical compared to purchasing a commercial jib crane
– Enhances safety by reducing manual lifting and strain

Cons:
– Requires careful planning and execution to ensure safety and structural integrit…
– May need periodic maintenance to ensure smooth operation and durability
– Load testing is crucial to ensure the crane can handle the intended weight witho…
– Installation can be complex, especially if mounting on a freestanding post
– Limited by the strength and stability of the mounting structure

Home made jib crane with photos

Product Details: A homemade jib crane typically consists of a vertical post, a horizontal beam, and a trolley system. The vertical post can be made from thick wall posts or pipes (e.g., 6″ pipe or 1mtr long thick wall post)[3][5]. The horizontal beam is often an I-beam or a rectangular beam (e.g., 150mm x 75mm, 2.3m long)[3][4]. The trolley system can include an electric winch or a chain fall, and it may require additional components like cable festoons for electric wires[3]. The crane can be mounted to the floor and ceiling or just to the floor, depending on the design and space

constraints[5].

Pros:
– Cost-effective as it can be built using scrap or repurposed materials
– Customizable to fit specific workshop or garage needs
– Can be designed to swivel and cover a wide area
– Enhances safety by reducing manual lifting of heavy objects
– Can be built with various capacities (e.g., 500lbs at the end of a 14′ beam)[4]

Cons:
– Requires significant DIY skills and welding expertise
– May take up considerable space, especially if mounted to both floor and ceiling
– Needs careful planning and alignment to ensure stability and safety
– Can be time-consuming to build, especially if doing it for the first time
– May require additional adjustments and modifications after initial setup[3]

Shop Jib Cranes People Have Built

Product Details: The thread on Hobby-Machinist.com features various homemade jib cranes built by users to service their workshops, particularly for machines like mills and lathes. One example includes a jib crane equipped with a 500kg electric hoist, designed to handle heavy lifting tasks efficiently. The cranes are often constructed from available materials such as steel beams and scrap metal, with careful attention to structural integrity and safety.

Pros:
– Customizable to fit specific workshop needs
– Cost-effective as they can be built from scrap or readily available materials
– Enhances safety by reducing manual lifting and the risk of injury
– Can be designed to handle heavy loads with the use of electric hoists

Cons:
– Requires significant DIY expertise and time to build
– May not meet industrial standards if not properly engineered
– Dependent on the quality and availability of materials used

Jib Crane Homemade

Product Details: A homemade jib crane typically consists of a vertical post, a horizontal boom, and a swivel mechanism. The vertical post can be made from a 4″ x 10′ pipe with a 1/4″ wall thickness or a thick wall post[4][3]. The boom can be an I-beam, such as a 6″ x 4″ x 3/8″ I-beam, or a rectangular beam like a 6″ x 3″ beam[3][4]. The swivel mechanism can use a trailer ball for smooth rotation[1]. The crane may also include a trolley system for moving loads along the boom and can be anchored to the ground or a wall for

stability[3][4].

Pros:
– Cost-effective as it can be made from scrap or repurposed materials[3][5] – Customizable to fit specific workshop or machine shop needs[1][5] – Improves efficiency in loading and unloading heavy materials[1][4] – Can be designed to pivot or swivel for better accessibility[1][5]

Cons:
– Requires significant metalworking skills and tools[1][2] – Safety concerns if not properly designed and load-tested[1][4] – Installation can be complex, especially if anchoring to the ground is required[3…
– May not be as durable or long-lasting as commercial jib cranes if not built with…

DIY custom 6 ton mobile telescopic jib crane,6 ton mini …

Product Details: Rated Loading Capacity: 6t, Rated Lifting Moment: 20T.M, Max. Lifting Height: 27.5m, Span: 4.12X4.9M, Place of Origin: Shandong, China

Pros:
– High lifting capacity with a rated loading of 6 tons
– Significant lifting height of up to 27.5 meters
– Customizable to meet specific needs

Cons:
– Limited information available on the product’s stability and outrigger span
– No details provided on the engine power, emission standards, or fuel consumption
– No mention of after-sales service or warranty

Jib crane building??

Product Details: A jib crane is a type of crane that consists of a horizontal beam (the jib or boom) that is attached to a vertical mast or wall. It is often used in workshops and manufacturing settings to lift and move heavy objects. The crane can be manually operated or equipped with hydraulic or electric hoists. Key components include the mast, jib, hoist, and mounting hardware.

Pros:
– Reduces the risk of injury by lifting heavy objects, thus saving the back and pr…
– Can be custom-built or DIY, making it affordable and adaptable to specific needs…
– Improves efficiency in workshops by facilitating easy movement of heavy tools an…

Cons:
– Requires proper installation and maintenance to ensure safety and functionality[…
– Higher capacity cranes can be expensive, with new ones costing around $8-10 gran…
– May require additional structural support, such as upgrading building uprights f…

China Jib Crane Diy Manufacturers and Factory, Suppliers

Product Details: A DIY jib crane typically consists of several key components including a boom or swing arm, a mast or vertical leg, an electrification system, a hoist, controls, a hook, and end effectors. The boom supports the hoist and other components, while the mast can be floor-supported or wall-mounted. The electrification system may include festooning, insulated conductor bars, or self-contained power systems. The hoist can be hand-powered, electric, or pneumatic. Controls can be mounted, remote, or pendant-style. The hook supports the load, and end effectors are customized to handle specific loads[1][3][4].

Pros:
– Cost-effective: DIY jib cranes can be built using scrap or repurposed materials,…
– Customizable: Can be tailored to specific lifting needs and workspace constraint…
– Increased efficiency: Simplifies the handling of heavy or awkward loads, reducin…
– Space-saving: Can be designed to fit within limited workshop or garage spaces[2]…

Cons:
– Technical expertise: Requires welding, engineering, and construction skills to b…
– Safety risks: If not properly constructed, can pose significant safety hazards[1…
– Maintenance: Requires regular inspection and maintenance to ensure continued saf…
– Limited capacity: DIY versions may have lower load capacities compared to commer…

140 Jib cranes ideas | welding projects, homemade tools …

Product Details: Jib cranes are overhead lifting devices with a horizontal jib or boom and a movable hoist. They can be floor-mounted, wall-mounted, or cantilevered. Capacities range from 1/4 to 5 tons, with rotations up to 360 degrees. They are used in various applications such as warehouses, military facilities, and equipment manufacturers. Key features include multiple hoist options (manual, electric chain, and pneumatic), robust bearing and adjustable slewing resistance, and advanced ergonomic design.

Pros:
– Improves safety and productivity
– Efficient and accurate load handling
– Simple to install and relocate
– Longer lifecycle with low maintenance requirements
– Easy serviceability minimizes downtime
– Enhances operator experience with adjustable features

Cons:
– Requires specific foundation or mounting requirements
– Limited by the available headroom and space constraints
– Higher initial investment compared to some other lifting solutions
– May require additional components for full functionality

Chinese DIY jib

Product Details: Max Lifting Capacity: 3000 Kg, Max Lifting Moment: 60 KN.m, Max Lifting Height: up to 10000 m (with 4.5m gantry), Min Working Distance: 1886 mm, Max Working Distance: 4505 mm, Rated Working Pressure: 20 Mpa, Rated System Flow: 40 L/min, Self weight: 480 Kg. Compatible with 3/5/7 ton forklifts.

Pros:
– High lifting capacity and moment
– Customizable to fit different gantry heights
– Long-term local after-sales service and remote technical support
– Secure payment protection and refund policy
– Flexible working distances

Cons:
– Requires specific forklift compatibility
– Self-weight is significant at 480 Kg
– Shipping costs and estimated delivery times need to be contacted separately
– Complex setup may require professional assistance

Comparison Table

Frequently Asked Questions (FAQs)

Frequently Asked Questions About Jib Crane Factories in China

What are the common applications of jib cranes in industrial settings?

Jib cranes are widely used in manufacturing plants, warehouses, and shipyards for lifting and moving heavy loads. They are essential for tasks such as loading/unloading, assembly line work, and material handling, making them a crucial part of efficient operations in various industries.

How do I choose a reliable supplier for jib cranes in China?

When looking for a reliable supplier in China, conduct thorough research, request credentials, and if possible, visit the manufacturing facilities. Consider the supplier’s reputation, experience, and customer reviews. Partnering with a trusted manufacturer ensures you get high-quality jib cranes and reliable after-sales support.

What types of jib cranes are available from Chinese manufacturers?

Chinese manufacturers offer a variety of jib cranes, including wall-mounted jib cranes, free-standing jib cranes, wall-traveling jib cranes, and articulating jib cranes. Each type has its unique features, such as different rotation capacities, arm lengths, and installation requirements, making them suitable for various industrial environments.

What certifications should I look for when purchasing a jib crane from China?

When purchasing a jib crane from China, look for certifications like ISO 9001, CE, and SGS. These certifications ensure that the product meets international quality and safety standards, providing you with a reliable and safe lifting solution.

Can Chinese jib crane manufacturers provide customized solutions and after-sales service?

Yes, many Chinese jib crane manufacturers offer customized solutions tailored to your specific needs. They also provide on-site installation services and lifelong maintenance support to ensure your crane operates efficiently and safely. This comprehensive service helps in maintaining the crane’s performance and extends its lifespan.